Wanting for a way to jazz up your wall artwork? Try out producing your individual Do it yourself acrylic frames for personalized 3D artwork. This write-up will stroll you through accurately how I built these in my dwelling.
If you are wanting for a custom way to body your images or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the great thing.
I landed on these frames for the reason that I essential a tiny a thing to insert a little extra pizzazz to my lavatory wall. 
We made the decision to incorporate my spouse&rsquos love of golf into the mix by printing photos he took of PGA golf courses he&rsquos performed in black and white.
I really like when art is a discussion piece, so this was the fantastic addition to the bathroom wall.
To make it really stand out, I produced these Diy acrylic frames for just about every of the images.
Here are the techniques I took&hellip 
Desk OF CONTENTS
- 1. Collect your products.
- 2. Tape just about every aspect of just about every corner.
- 3. Mark where by you want to drill your holes.
- 4. Drill your holes.
- 5. Use your glue dots to protected your pics to the body.
- six. Mark the whole on the wall wherever you program to hang it.
- 7. Use your punch software to mark the full on the wall.
- 8. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- ten. Attach your frame to the standoffs.
- 11. Revel in the completed merchandise!
Disclaimer: This article does consist of affiliate backlinks for your advantage. This is at NO extra cost to you but earns me a modest fee. To browse far more, examine out our disclosure coverage.
one. Assemble YOUR Elements.
Initially matters first, gather all your materials. All sources for every little thing I used are joined underneath. I also included a listing with hyperlinks of what we utilised to dangle the frames, much too. 
FOR Making THE Diy ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (a person for the dimensions of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Resource (I used a Sharpie)
FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:
- Pencil
- Handheld Amount
- Punch
- Screwdriver
two. TAPE Each individual Facet OF Each CORNER.
Plexiglass/acrylic is pretty delicate.
Because of this, you have to be really thorough when you are drilling the holes.
Putting a piece of painter&rsquos tape on possibly aspect where you prepare to drill your gap will assist maintain the acrylic sheet from breaking or cracking when you drill.
I also retained the protecting go over on every single aspect of the piece, way too.
3. MARK In which YOU WANT TO DRILL YOUR HOLES.
When you have put the painter&rsquos tape on all four sides (or nonetheless numerous places you strategy to drill a hole), you can area a mark of wherever you want to drill your gap.
I drilled my holes one&Prime in from just about every edge as you can see from the image above.
4. DRILL YOUR HOLES.
Just before essentially drilling, double and triple check out that your marks are degree both of those horizontally and vertically.
You&rsquoll want to have these level for when you cling them. 
The drill little bit you pick out need to be massive adequate to allow the standoff to fit in just the hole.
I would do a exam operate on a piece of scrap product to make confident it is significant ample. 
The moment you are specified that the marking are level and the little bit is major more than enough, you want to begin drilling.
Below is a good video clip to observe if you would like a demonstration on how to drill by way of acrylic.
You want to use about half electrical power when you are drilling.
Gradual and constant. If you go to speedy, the acrylic will crack, so get your time.
As you drill you should really see spirals of the acrylic slowly and gradually remaining taken out. 
Repeat the drilling for each and every gap you have to have.
five. USE YOUR GLUE DOTS TO Safe YOUR Photos TO THE Body.
At the time your holes are developed, you can incorporate your photo to the piece of acrylic/frame.
The vital here is to again, make absolutely sure your photograph is degree right before you totally secure it to the frame.
The glue dots are incredibly sticky and don&rsquot allow for for a ton of wiggle place, so it might be a great concept to line up a piece of lined paper powering the frame to assist you line the edges of your image.
Whichever trick functions for you to make certain the image will get glued to the body amount will do. 
six. MARK THE Complete ON THE WALL Exactly where YOU Approach TO Hold IT.
As you start off to hold, mark your holes on the wall, but make guaranteed your body is level.
If you measured the right way in the action ahead of drilling, the holes on your frame should really now be amount.
If you are hanging more than a single frame like I did, make positive every frame is degree in your grid, far too. 
seven. USE YOUR PUNCH Software TO MARK THE Complete ON THE WALL.
I really like this instrument so much simply because it will get your gap started and allows your drill to remain in place when you start out drilling.
If you don&rsquot have a single, I really endorse it!
8. DRILL YOUR HOLES IN THE WALL.
Be positive to use a bit that suits the screws that came together with your standoffs.
This will most very likely be a more compact bit than the a single you employed on the frames.
I also employed a stud finder to see if I desired drywall anchors, but simply because these frames are not that weighty, you could most likely do without having them.
nine. click to read more THE STANDOFFS INTO THE WALL.
Once you invest in your standoffs, you&rsquoll see how they operate.
In buy for the picture to &ldquostand off&rdquo the wall, you have to secure the standoff with the offered screw in advance of attaching the picture to the standoffs.
As you can see from the photograph, creating certain every thing is amount and calculated properly is tremendous important. 
10. Connect YOUR Body TO THE STANDOFFS.
Once you&rsquove connected the standoffs, it&rsquos time to attach the images!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes very well, every little thing will line up properly and be completely ready to go!
If you are like my dad and I, you&rsquoll arrive across at the very least 1 that doesn&rsquot line up properly.
For this, we cheated a little little bit and secured the standoff to the frame and used a glue dot to protected it to the wall, so it didn&rsquot transfer.
We only experienced to do this for two corners of two frames, but don&rsquot worry if you mess up one particular&hellip We&rsquove been there! 
eleven. REVEL IN THE Concluded Solution!
Now it&rsquos time to take pleasure in your function!
We did a grid of nine whole pics which was a major endeavor with all the measuring, but I&rsquom in like with how it turned out.
Let me know in the responses what you think of the finished products!