姓名 Name
林峻永 Chun-Yeon Lin
職稱 Title
助理教授 Assistant Professor
辦公室 Office
工綜513室
Rm.513,College of Engineering Bldg
電話 Phone
3366-2725
傳真 Fax
+886-2-2363-1755
電子郵件 E-mail
個人網頁Homepage
https://sites.google.com/view/miarl
實驗室 Lab
機電與智慧自動化實驗室
永齡生醫館231室
Mechatronics and Intelligent Automation Research Laboratory
Biomedical Engineering Hall Room 231
TEL:+886-2-33662725
自傳 Short Biography
學歷 Education
學歷 (Education):
2017, Ph.D., the George W. Wooddruff School of Mechanical Engineering, Georgia Institute of Technology
2011, M.S., Department of Mechanical Engineering, Stanford University
2005, M.S., Department of Electrical Control Engineering, National Chiao Tung University
2003, B.S., Department of Mechanical Engineering, National Central University
經歷 Professional Experience
經歷:
Research Assistant/Teaching Assistant, the George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 2011.8~2017.12
Research Assistant, Mechanical Engineering Department, National Taiwan University, 2008.12~2009.7
研究領域 Research Interests
機電整合及自動化,系統動態及模型,磁電機電系統
Mechatronics and automation, system dynamics and modeling, magneto-mechatronics system
教學課程 Teaching Courses
自動控制,動力學,機器人視覺(與黃漢邦教授合授), 微處理器控制系統(與楊燿州、楊士進教授合授)
Automatic control, dynamics, robotic vision, Microprocessor Controlled Systems
研究著作 Publications
期刊論文 (Journal Papers)
期刊論文 (Journal Papers):
- K.-M. Lee, Y. Huang, J.J. Ji, and C.-Y. Lin, “An Online Tool Temperature Monitoring Method based on Infrared Imaging and Model-trained Artificial Neural Network for Dry Cutting,” IEEE Trans. on Automation Science and Engineering, vol. 15, No. 4, pp. 1665-1676, 2018.
- C.-Y. Lin, K.-M. Lee, and B.J. Hao, “Distributed Current Source Method for Modeling Magnetic and Eddy-Current Fields Induced in Non-Ferrous Metallic Objects,” IEEE/ASME Trans. on Mechatronics, vol. 23, no. 3, pp. 1038-1049, 2018.
- K.-M. Lee, C.-Y. Lin, B.J. Hao, and M. Li, “Coupled Parametric Effects on Magnetic Fields of Eddy-Current Induced in Non-Ferrous Metal Plate for Simultaneous Estimation of Geometrical Parameters and Electrical Conductivity,” IEEE Trans. on Magnetics, vol. 53, no.10, pp.1-9, 2017.
- K.-M. Lee, M. Li and, C.-Y. Lin, “Magnetic Tensor Sensor and Way-finding Method Based on Geomagnetic Field Effects With Applications for Visually Impaired Users,” IEEE/ASME Trans. on Mechatronics, vol. 52, no.8, pp.2694-2704, 2016.
- Y. Chen, K.-M. Lee, C.-Y. Lin, and X. Fu, “Lumped-Parameter Modeling of an Immersion Flow Field for Analyzing Meniscus Dynamic Behavior,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 136, no.1, pp.1-8, 2014.
- C.-Y. Lin, C.-H. Su, C.-M. Hsu, and C.-R. Lin, “Improvement of the Microcrystalline Cube Corner Reflective Structure and Efficiency,” Japanese Journal of Applied Physics, Vol. 47, No. 7, pp.5693-5701, 2008.
國際會議論文 (International Conference Papers)
國際會議論文 (International Conference Papers):
- C.-T. Li, C.-Y. Lin, H.-P. Huang, “Torque Estimation Technique for Harmonic Drive Actuator,” International Conference on Advanced Robotics and Intelligent Systems, 2021
- Z.-H. Kang, H.-P. Huang, C.-Y. Lin, “Modeling Elastic-Joint Dynamics for Robotic Arms,” International Conference on Advanced Robotics and Intelligent Systems, 2021.
- C.-Y. Lin, H.-T. Chen, H.-F. Cheng, and Y.-J. He, “Electrical Impedance Sensing System Design for Abnormal Object Detection,” IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2021, pp. 1313-1318. (2021 IEEE/ASME AIM Conference Best Paper Finalist)
- C.-Y. Lin, Y.-C. Wu, Y.-L. Chen, and S.-C. Huang, “Bio-Magnetic/Eddy-Current Sensor Design for Biological Object Detection,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2020, pp.18-23.
- C.-Y. Lin, K.-M. Lee, Y.-L. Chen, and S.-C. Huang, “Distributed Current Source Method for Magnetic and Eddy-Current Fields Formulation of Biological Objects,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2019, pp.1522-1527.
- C.-Y. Lin, K.-M. Lee, J.W. Li, and K. Bai, “Distributed Parameter Element Method for Design Analysis of Electrical Muscle Stimulation,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2018, pp.1069-1074.
- K.-M. Lee, C.-Y. Lin, M. Li, and B.J. Hao, “Harmonic Response of an Eddy-Current Sensor for Real-time Measurement of Thin-wall Titanium Alloy Workpiece,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2016, pp. 1271-1276.
- K.-M. Lee, C.-Y. Lin, and M. Li, “A Continuous-field Actuation Method for Transducing Optical Color Images to Magnetic/ Eddy-Current Patterns,” in Proc. ASME Dynamic Systems and Control Conference, 2015.
- K.-M. Lee, M. Li, and C.-Y. Lin, “A Novel Way-finding Method based on Geomagnetic Field Effects and Magnetic Tensor Measurements for Visually Impaired Users,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics,2015, pp. 232-237. (2015 ASME DSCD Best Mechatronics Paper Award, 2015 IEEE/ASME AIM Conference Best Paper Finalist)
- J.J. Ji, K.-M. Lee, C.-Y. Lin and H. Yang, “An Investigation on Temperature Measurements for Machining of Titanium Alloy using IR Imager with Physics-based Reconstruction,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2015, pp. 915-920.
- K.-M. Lee, and C.-Y. Lin, “Design Concept of a Novel EM-Array Magnetic Scanning System for Continuous Motion Control of Maximum MFD,” in Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July, 2014, pp. 1581-1586.
- Y. Chen, K.-M. Lee, C.-Y. Lin, and X. Fu “Lumped-Parameter Modeling for Meniscus Dynamic Analysis in Immersion Flow Field”, in Proc. ASME Dynamic Systems and Control Conference, 2012.
- C.-Y. Lin and H.-P. Huang, “Tour-Guide Robot Integrated with Utterance Generation System based on Joint Attention Mechanism”, International Conference on Service and Interactive Robotics, 2009.
- C.-H. Su, C.-R. Lin, C.-Y. Lin, J.-Y. Jhuang, and C.-M. Hsu, “Characteristic Optimization of MWCNTs Using MPCVD system”, in Proc. IEEE International Conference on Systems, Man, and Cybernetics, 2007, pp. 3011-3015.
- C.-R. Lin, C.-H. Su, C.-M. Hsu, J.-Y. Jhuang, and C.-Y. Lin, “A Calculation of Microwave Power in A MPCVD System Using 2-D Gaussian Mixture Modeling”, in Proc. IEEE International Conference on Systems, Man, and Cybernetics, 2007, pp. 3006-3010.
- C.-T. Lin, C.-L. Chin, K.-W. Fan, and C.-Y. Lin, “A Novel Architecture for Converting Single 2D Image into 3D Effect Image”, in Proc. IEEE Int. Workshop Cellular Neural Networks Applications, 2005, pp. 52-55.
國內會議論文 (Domestic Conference Papers)
國內會議論文 (Domestic Conference Papers):
- C.-Y. Lin, H.-P. Huang, C.-Y. Lee, G.-Z. Lee, and Y.-C. Dong, “Characteristic Analysis of Harmonic Driver Actuator and its Applications”, The 37th National Conference on Mechanical Engineering of the Chinese Society of Mechanical Engineers, 2020.
- C.-T. Lin, S.-C. Hsu, C.-Y. Lin, and J.-F. Lee “A Fully-Automated 2D to 3D Image Conversion Technique Applied on Stereo Display”, The 23th IPPR conference on Computer Vision, Graphics and Image Processing, 2010. (第二十三屆電腦視覺、圖學暨影像處理學會佳作論文獎)
- C.-T. Lin, C.-Y. Lin, K.-W. Fan, H.-C. Pu, and S.-F. Liang, “A Novel 2D to 3D Image Technique Based on Objected-Oriented Conversion”, The 18th IPPR Conference on Computer Vision, Graphics and Image Processing, 2005.
- C.-Y. Lin, C.-R. Lin, C.-H. Su, and C.-K. Chang, “Simulation of the Efficiency of the Modified Reflective Material Based on the Microcrystalline Cube Corner”, The 24th National Conference on Mechanical Engineering of the Chinese Society of Mechanical Engineers, 2007.
- C.-R. Lin, C.-H. Su, C.-H. Wang, and C.-Y. Lin, “A Study of Manufacturing and Performance Improvement of Reflectors with Micro Cube Corners”, The 23rd National Conference on Mechanical Engineering of the Chinese Society of Mechanical Engineers,2006.
專利 (Patents)
專書章節 (Book Chapters)
得獎紀錄 (Honors)
榮譽:
- Best Paper Competition-Silver, Automation 2021
- Best Conference Paper Finalist, IEEE/ASME International Conference on Advanced Intelligent Mechatronics 2021
- 優秀年輕學者研究計畫, 2020年
Excellent Young Scholar Research Grant, 2020 - Best Mechatronics Paper Award, ASME Dynamic Systems and Control Division, Mechatronics Technical Committee, 2015
- Best Conference Paper Finalist, IEEE/ASME International Conference on Advanced Intelligent Mechatronics 2015
- 教育部留學獎學金, 2011年
Government Scholarship to Study Abroad, 2011 - 第二十三屆電腦視覺、圖學暨影像處理學會佳作論文獎, 2010年
Excellent Paper Award, the 23th IPPR conference on Computer Vision, Graphics and Image Processing 2010 - Graduate top in class, National Central University, 2003
指導學生獲獎:
1. 吳易秦、鄧立潔、陳冠丞榮獲Best Paper Competition-Silver, Automation 2021
2. 陳皓澤、 鄭皓方、何育駿榮獲Best Conference Paper Finalist, IEEE/ASME International Conference on Advanced Intelligent Mechatronics 2021
3. 謝定群榮獲科技部大專學生研究計畫, 2021年
4. 陳淵量榮獲中國機械工程學會109 年度碩士論文獎佳作, 2020年
研究計畫 (Research Projects)
- 基於模型之多重物理場智慧型機電系統設計開發,主持人,計畫期間:2/1/2019~1/31/2021,委任單位:科技部
- 多重物理場重構及參數預測效果探討,主持人,計畫期間:1/1/2019~12/31/2019,委任單位:宗倬章先生教育基金會
- 撲翼飛行模擬器之設計及開發,共同主持人,計畫期間:1/1/2020~,委任單位:臺灣大學
- 從金屬到生物組織點面體智慧型感測系統開發,主持人,計畫期間:8/1/2020~7/31/2023,委任單位:科技部 (優秀年輕學者研究計畫)